Doris Kang

Also referred to as a static, line or stationary concrete pump, a trailer mounted pump the type of pump which is typically connected to an individual or multi-axle trailer. This type of concrete pump is usually then mounted on a vehicle that can retain the weight of your pump and moved to the region where you will find a construction project.

How Can This Kind Of Pump Work?

Most of these concrete pumps generally have a concrete pumping capacity that usually ranges between 30 cubic meters to 135 cubic meters each hour. In choosing a trailer mounted pump, you ought to be guided from the needs in your construction site.

Once moved to a construction site by a vehicle, concrete is usually pumped through flexible pipes under high pressure and sent to where it really is needed.

Even though the concrete pump has only one end, several pipes could be attached while using requisite coupling. This essentially implies that different areas with the construction site could be served by one pump without the need for moving the ensemble everywhere in the workplace. When several pipes are employed, they can be usually controlled by construction workers on the output area but the input might be controlled from a gate valve to ensure just the pipes will be in use have a discharge.

Inside a construction site, it is wise to make sure that you place the trailer concrete pump in a readily accessible area to ensure that mixers nearby can feed it easily. If you would like have a steady and velocity flow of concrete when you use a line pump, you need to ensure that the pump always includes a steady feed of concrete.

Advantages Of Choosing a Trailer Concrete Pump

This type of pump is highly flexible in that you can attach numerous pipes and serve any area in your construction. Because of this you do not have to keep moving the towing vehicle and concrete mixing plants whenever you change your construction area.

Since this kind of concrete pump could have many pipes attached all at one time, it implies that you can get work done two times as fast. With a static concrete pump, you will not possess any downtime along with your workers. All your labor force might be at the office at one time.

An additional benefit of such pumps is the fact that velocity of concrete flowing with the pipes can be adjusted when needed. Additionally, you can even shut or turn on flow to pipes depending on your expections. If you use this type of pump, you can also lengthen or shorten the attached lines dependant upon the area you where construction will be completed. Basically, it gives you contractors more convenience.

Having a static pump, it is possible to pump concrete vertically approximately 400 meters and as well, you may pump horizontally for approximately 2,000 meters without hassle. This can be unlike other types of pumps where you will need to use pulleys or other types of conveyer belts to acquire concrete where it is needed.

Aside from the proven fact that concrete could be taken where it can be needed in a jiffy, this type of pump could also be used in construction projects where conventional concrete mixing plants should not be used like during the construction of tunnels or any other underground spaces.